© Copyright 2018 WyreStorm Technologies |
Enado Installation Manual | 180913
20 of 38
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
Email:
Adding Control Buttons
There are many types of buttons throughout the Enado interface. Each type of button serves a unique purpose.
Zone/Room
Allows navigation into a Zone/Room for a
project. Can also be used to designate an
output of a matrix.
Added to a page the Zone/Room page by
pressing the Quick Insert plus button.
Activity
Located within a Zone/Room. Typically, a
link
to an “Activity Layout”. An Activity
Layout links to control a source device or
can double as a matrix input selection.
Added to an Activity page by pressing the
Quick Insert plus button.
Shortcut
Unique per Zone/Room. Always appear at
the top right of the interface. Can be
programmed in the same way as an
Activity button.
Added to an Activity page by pressing the
Quick Insert plus button.
Global
Unique per Zone/Room. Always appear at
the bottom right of the interface. Cannot
be linked to an Activity Layout. Are
typically used for volume or display power
commands.
Added to an Activity page by pressing the
Quick Insert plus button.
Control
Buttons that are located within an Activity
Layout. Offer the broadest configuration
options. These are typically buttons that
control source devices.
Added to an Activity Layout from the top
menu by select Insert>Button Group>
Custom OR From Library