8
Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
SPECIFICA
TION AND TYPICAL APPLICA
TION
8i. Specification (EX-1UTP-IR-100-EDID)
9. Updating RS232 Settings on the
EX-1UTP-IR-100-POH Receiver
8ii. Specification (EX-1UTP-IR-100-POH)
NOTE: Specifications are subject to change without
notice. Mass and dimensions are approximate
.
100m/328ft
12VDC
0.86kg / 1.87lbs (Each)
(Each)
Mass (Per Main unit)
sync)
sync)
17 Watts Max (Pairs with EX-1UTP-IR-100-POH Transmitter)
145mmWx106mmDx29mmH/5.71”Wx4.17”Dx1.14”H (Transmitter)
130mmWx106mmDx29mmH/5.11”Wx4.17”Dx1.14”H (Receiver)
100m/328ft
1. Carefully open the case of the EX-1UTP-IR-100-POH Receiver. On the edge of the circuit board are positioned two
jumper caps to change settings from the ‘Normal’ position for default operation to ‘Update’, which allows the system
to enter Firmware Update Mode