800.255.3126 | wyeastmedical.com
52521 R01 Whitney Safety Platform Walker
Operator’s Manual
Page 7 of 20
WHITNEY
Safety Platform Walker
PRIOR TO FIRST USE:
The battery must be charged for 24 hours in order to reach proper function and prolong
the lifetime of the batteries.
Insure all cables are completely pushed in. A light film of silicon grease may be dabbed
onto oring to allow easier insertion.
The duty cycle on the control box product label must always be noted. Otherwise there
is a risk of damaging the products. Exceeding the duty cycle will result in a dramatic
reduction of the lifetime of the system. Unless specified otherwise on the product label
the duty cycle is max. 10% : Max. 2 minutes in the use followed by 18 minutes not in use.
If any individual parts are suspected to be damaged, do not operate the parts, but return
them for inspection/service.
BEFORE AND AFTER EVERY USE:
1. Always perform a risk assessment before starting the specific lifting session in order to make
sure the product model is correct and that the lifting procedure is fully understood.
2. Before using the sling, read this instruction manual and the instruction manual for the lifting
equipment being used.
3. When soiled or stained, the sling must be washed before use.
4.
Warning
: Check the sling for any fraying, loose stitching, attachments or any deteriorations.
5. After use, check the sling according to steps 3 and 4 and store in a dry area.
