800.255.3126 | wyeastmedical.com
52521 R01 Whitney Safety Platform Walker
Operator’s Manual
Page 10 of 20
WHITNEY
Safety Platform Walker
FEATURES:
Control Box Wiring
Remove the control box cover to make the connections as
described below. Use a screwdriver or similar; refer to the
special labels on the control box.
NOTE! Make sure that plugs are connected to the correct
sockets otherwise the actuators can be damaged.
1. Pendant socket.
2. Battery terminal socket.
3. Socket for leg width adjustment actuator.
4. Socket for the platform height adjustment actuator.
Battery Charging
• Connect plug to 110V wall socket. Charging begins
automatically and the battery LED flashes green.
• Make sure the battery is fully charged before first
use. It takes around 24 hours to fully charge the
battery.
2. Battery
4. Platform
Actuator
1. Pendant
(behind
battery plug)
3. Leg
Actuator