15
ASSEMBLY
Unfolding the kick scooter
In order to unfold the kick scooter, you should first release the folding lock (element
no. 12) by pulling the lever away from the kick scooter. Next, press the fast-folding
system lever (element no. 13) until the lock is deactivated. Keep pressing the fast-
folding system button and start slowly pulling up the steering column to an upright
position. As soon as the steering column gets fixed in an upright position, you will
hear a “click” sound meaning that it is fixed properly. Next, activate the folding lock by
pushing the lever towards the scooter.
WARNING:
Remember to firmly tighten the folding lock system. The fast-folding
system button should not be possible to be pressed when the lock is tightened
properly.
Handle grips assembly
In order to assemble the handle grips, you must pull them out of the attachment
point for handle grip and carry strap. Next, you must place the handle grips into the
handlebar opening. The blocking pins on the handlebar should be hidden during
placing the handle bars into the opening – you can hold them pressed with your
fingers. After placing the handle grips in the opening, the pins should jump back to their
initial position and appear in openings designed specifically for them. After assembly,
make sure that they are firmly fixed by pulling them away from the handlebar a few
times. Properly placed handle grips should not be able to be moved nor should they
be able to be turned around.
11
12
13
14
15
16
17
18
19
20
Front wheel (20cm)
Folding system lock
Fast-folding lever
Kickstand
Deck
Back shock absorber
Leg brake
Reflective fender/mudguard
Brake disc
Rear wheel (20cm)
Steering column height adjustment
In order to adjust the height of the steering column, pull the clamp away from the
column. Next, press the steering column height locking pin (placed on the side of the
steering column) so that it does not protrude out of the opening and pull up or push
down the steering column to the desired height until the pin clicks back and appears
in the opening on the side of the steering column. In order to fully secure the steering
column at a desired height, you must firmly tighten the clamp by turning the lever
around and then pushing the lever towards the sterering column.
WARNING:
After setting the steering column at a desired height, make sure that
the blocking pin is protruding above the surface of the steering column meaning that
the steering column height lock is activated and the clamp is properly tightened.
Summary of Contents for HMRSTA02
