WWBeds Face Unassembled Alpha Murphy, Assembly Instructions Manual, Page: 17 / 18

Additional Options
Bookcase Option
The bookcase will mount to the bed at the top using 1 ¼” screws. You can also put one inside the lower
section by pulling out a drawer. We may not have pre-drill for these holes so you can place them anywhere.
Desk Option
Note: On some applications we have put the screws back in
on the face (right above the black bracket) and also at the
bottom, into the Side panels. If this is the case remove
those screws and use them to assemble the desk. If not
you should find them labeled in your hardware pack.
Desk Step D-1 | Attach the Desk Riser to the Desktop.
If they are not already inserted, insert the hardwood dowels
into the bottom of the Desk Riser. The Desk Riser will attach
to the Desktop by inserting the dowel side into the dowel
holes on the Desktop. Keep in mind there is usually a front
and a back to the Desk Riser. Make sure the good side is
facing forward.
Note: the holes cut in the Desktop are elongated and allow left to right movement. Make sure the
edges of the Desk Riser and Desktop are even and insert the 1 ½” screws.
Desk Step D-2 | Attach the Desk Mechanism to Desk
The Desk Mechanism has holes in the Desk Upper Bracket that
forms an “L”. Attach the desk to the mechanism using 20 - ⅝”
pan head screws.