12
1.1 THE SWITCH
The switch has six positions. To access the
,
,
,
,
, functions, set the switch to the
desired function. Each setting is confirmed by an audible signal. The functions are described in the table below.
Item Function
1
OFF mode – Switches the clamp multimeter off
2
AC, DC, AC+DC voltage measurement (V)
3
Continuity test
Resistance measurement
Ω
Diode test
4
AC, DC, AC+DC current measurement (A)
5
Power measurements (W, var, VA) and
calculation of the power factor (PF) AC, DC,
AC+DC
6
Indicator of the order of the phases
1.2 THE KEYS OF THE KEYPAD
Item Function
1
Storage of values, disabling of display
Zero correction A
DC
/A
AC+DC
/W
DC
/W
AC+DC
Compensation of the resistance of the leads in
the continuity and ohmmeter function
2
Selection of the type of measurement (AC, DC,
AC+DC)
Selection of single-phase or three-phase
measurement
3
Activation or de-activation of the backlighting
of the display unit
4
Activation or de-activation of the MAX/MIN/
PEAK mode
Activation or de-activation of the INRUSH mode
in A
5
Measurements of frequency (Hz), of the level of
harmonics (THD)
Display of the powers W, VA, var and PF
6
Activation of the ΔREL mode – Display of
relative and differential values
Summary of Contents for 0715 58 770
Page 2: ... 3 8 9 14 15 20 21 26 27 32 33 38 ...
Page 39: ...39 ...