22
Additional safety warnings
Wear safety goggles.
Use appropriate detectors to determine if util-
ity lines are hidden in the work area or call the
local utility company for assistance.
Contact with
electric lines can lead to fire and electric shock. Damaging
a gas line can lead to explosion. Penetrating a water line
causes property damage.
Do not touch grinding and cutting discs before
they have cooled down.
The discs can become very
hot while working.
Secure the workpiece.
A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
Do not open the battery.
Danger of short-circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture.
Danger of explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints.
The vapours can irritate the respiratory system.
Use the battery only in conjunction with your
Würth power tool.
This measure alone protects the
battery against dangerous overload.
The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally.
An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.
Use only original Würth accessories.
Product Description and Specifications
Read all safety warnings and all
instructions.
Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
For damage caused by usage other than intended, the user is
responsible.
Product Features
The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1
Spindle lock button
2
On/Off switch
3
Hex key
4
Battery pack*
5
Battery unlocking button*
6
Auxiliary handle (insulated gripping surface)
7
Grinder spindle
8
Locking screw for protection guard
9
Protection guard for grinding
10
Mounting flange with O-ring
11
Grinding wheel*
12
Clamping nut
13
Quick-clamping nut
14
Carbide grinding head*
15
Protection guard for cutting*
16
Cutting disc*
17
Hand guard*
18
Rubber sanding plate*
19
Sanding sheet*
20
Round nut*
21
Cup brush*
22
Button for charge-control indicator*
23
Battery charge-control indicator*
24
Handle (insulated gripping surface)
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete over-
view of accessories can be found in our accessories pro-
gram.
Summary of Contents for EWS 18-A
Page 3: ...3 ...
Page 4: ...4 5 ...
