12
Disinfection of the A/C systems with
EVAPO
®
clean
▸
Position the EVAPO
®
MAT
on the passenger side
on the floor.
▸
Make sure the outlet nozzle
[10]
points in the
direction of the ventilation openings.
▸
Start the vehicle.
▸
Set the automatic climate control to “Off”.
▸
Set “Economy” mode to “On”.
▸
Set the temperature selection to the lowest setting
“Low”.
▸
Set “Recirculation” mode to “On”.
▸
Set the fan to the lowest level.
▸
Open the air openings.
▸
Switch on the EVAPO
®
MAT using the On/Off
switch
[12]
, check that a spray mist comes out of
the outlet nozzle
[10]
.
▸
Exit the vehicle; close vehicle doors and win-
dows.
3
When the status indicator
[5]
changes from
green to red, the process is complete.
3
The EVAPO
®
MAT
switches off automatically.
▸
Then open all vehicle doors and ventilate for
about 10 - 20 minutes.
Disinfecting interior spaces with
EVAPO
®
fresh
▸
Place the EVAPO
®
MAT
in the middle of the
interior space and switch on via the
On/Off
switch
[12]
.
▸
Close doors and windows and leave the interior
space.
3
When the status indicator
[5]
changes from
green to red, the process is complete.
3
The EVAPO
®
MAT
switches off automatically.
▸
Then open all doors and windows and ventilate
the interior space for about 10 - 20 minutes.
Maintenance and cleaning
WARNING !
Danger of electric current.
¾
Carry out maintenance and cleaning
work on the device only when the
mains plug has been removed.
CAUTION !
Risk of injuries or property damage due
to improper actions.
¾
Do not open the device.
¾
The device must only be opened by
Würth masterService.
¾
Observe the relevant safety and
accident prevention regulations
during all maintenance and servicing
work.
▸
Pull out the mains plug
from the EVAPO
®
MAT.
▸
Remove and dispose of empty can receptable.
▸
Fill approx. 100 ml water into the can receptacle,
lightly shake the EVAPO
®
MAT, then drain out the
water.
▸
Protect On/Off switch
[12]
and
connection
socket
[1]
against water splashes.
▸
Clean the EVAPO
®
MAT, power cable, plug and
On/Off switch with a dry, non-abrasive cloth.
▸
Inspect the mains cable and plug for damage at
regular intervals.
Accessories and Spare Parts
If in spite of careful manufacturing and test proce-
dures, the EVAPO
®
MAT becomes faulty, a repair by
Würth masterService should be arranged.
With any enquiries or spare parts orders, always
quote the article number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
BAL_EVAPOMAT.indb 12
16-12-22 ��5:16
Summary of Contents for EVAPO MAT 0891 764 400
