26
9
10
11
G
I
H
E
D
F
G
G
8
ALUMINIUM HYDRAULIC CYLINDER 17 TON
TECHNICAL FEATURES
The mechanical properties, the shape and dimensioning for which
they were designed, ensure that WÜRTH hydraulic cylinders have a
field of use restricted to the automotive industry as:
• Injectors disassembly;
• Bearings assembly;
• Coaxial unlocking of very tight mechanical components;
TECHNICAL SPECIFICATIONS
TABLE A
17 Ton
Coupling connection thread
3/8" -18 NPT
Stroke
43 mm.
Dimensions
Ø90 x 122
Max Pressure
700 Bar
Weight
2,2 Kg
Hole utilized
Ø20
Temperature range
-10°C ÷ 65°C
Recommended fluid viscosity
15÷100 mm²/s
Outside connection thread
2 3/4-16 UN
Extraction bushes supplied
Attention
: see the chart in the
first part of the manual (page 3).
M18x1.5
M16
M14
M12
M10
INSTALLATION
Make the hydraulic connections using a pump with a discharge
valve (or a three-way valve) and a hose for high pressure.
Tighten completely by hand all the couplers (quick-connect
coupling). The connections of loose couplers will block the flow of
oil between the pump and the cylinder.
Bleed air from the cylinder. Place the cylinder in such a way that the
rod is directed downwards and that the cylinder is lower than the
pump. Extend the piston completely and then return it several times,
until the operation is smooth.
WARNING: Some couplers (of the hose or the
pump) require that the cylinder is used no more
than 50% of its calculated capacity. Refer to the
instructions of the accessories (hose and pump)
for additional information.
