Würth 0891 385 008, Translation Of The Original Operating Instructions

Page: 17 / 164

17
Maintenance and cleaning
Observe the accident prevention regula -
tions specified in the legislation in our
countr and check the device regularl .
If there are no special rules, e rec -
ommend an external inspection ever
2 ears and an internal inspection ever
5 ears b an expert.
After 50 uses, or at least annuall :
▸
Screw the pump
[2]
out of the container.
(Fig. )
▸
Disassemble the pump [2] . (Fig. 1 )
▸
Grease the O-ring
[13]
and the sleeve
[14]
.
(Fig. 1 )
▸
Assemble the pump.
▸
Lock the plunger ith handle
[1 ] ( g. )
and scre the pump [2] into the container [1]
( g. )
.
▸
Clean the nozzle [17] under running ater.
(Fig. 1 )
▸
Unscre the handle [19] from the shut-o
valve
[6]
.
(Fig. 1 )
▸
Remove the filter [18] and clean it under running
water.
(Fig. 1 )
▸
Disassemble the shut-o valve [6] . (Fig. 2 )
a)
Remove the ring [21] .
b)
Undo the 4 scre s and pull the half-shells
[20]
apart.
c)
Unscrew the sealing plug [25] from the valve
bod
[22]
and pull the pressure pin
[24]
out
of the valve bod [22] . (Fig. 21)
▸
Grease the O-rings
[23]
.
(Fig. 21)
▸
Assemble the shut-o valve [6] .
isposal
Do not dispose of this device ith
household aste. Dispose of the device
via an approved aste disposal
compan or via our local authorit
aste disposal facilit . Observe the
currentl valid regulations. In case of doubt, contact
our aste disposal facilit . Dispose of all packag -
ing in an environmentall compatible manner.
ollect and dispose of residual volumes
according to the applicable la s, regula -
tions and rules. Observe the agent manu -
facturer s regulations!
Warrant
We provide a arrant for this Würth device from
the date of purchase and in accordance ith the
legal/countr -specific regulations (proof of purchase
through invoice or deliver note).
Damage that has occurred ill be corrected either
b replacement or b repair. Damage caused b
improper handling is not covered b the arrant .
Claims under arrant can onl be accepted if
the device is returned full assembled to a Würth
agenc , our Würth sales representative or an
authorised Würth customer service orkshop.
Subject to technical changes without prior notice.
We accept no liabilit for printing errors.