Würth 0891 385 008, Translation Of The Original Operating Instructions

Page: 14 / 164

14
Intended use
Pressurised spra appliances are intended for the
spra ing of alkaline cleaning and care products.
These agents must be approved b the manufacturer
for use in spra appliances.
Nitric, acetic and propanoic acids ma onl be used
in concentrations up to 10%, phosphoric and sul -
phuric acid up to 30%, and potassium and sodium
h droxide solutions up to 20%.
Not suitable for
• Combustible li uids
• Corrosive substances (certain disinfectant and
impregnating agents, acids, bases)
• Ammonia containing li uids
• Li uids ith temperatures greater than 40°C
• Wetting agents (surfactants) solvents and solvent
containing li uids, hich could trigger or pro -
mote cracking in the plastics used
• Viscous, stick or residue forming li uids (d es,
grease)
• Use in food production
o not under an circumstances use
• xternal pressure sources ithout an origi -
nal-e uipment compressed air filling valve
• For de agration
• For storage of li uids
• As an e e ash
mproper use can result in dangerous inju -
ries and harm to the environment.
The user is liable for damage in the event
of improper use.
cope of deliver [ g. ]
Overvie
1
Container
2 Pump
3
Hose
4 Instructions for use
5
Spra ing tube
6 Shut-o valve
Parts kit
7
Carr ing belt
26 Union nuts
27
Elbow
Technical data
tem 0891 385 008
Max. filling uantit 5 l
Total content 8 l
Max. spra ing pressure 3 bar
Max. operating tem -
perature
40 °C
mpt eight 2.6 kg
Total weight 7.6 kg
Container material Pol eth lene
Method of carr ing On the side
Technical residual
uantit
< 0.07 l
Max. volume o 1 l/min
Recoil < 5 N
Pressure change from
0 to 3 bar
At least 5000 x
ssembl
▸
Fasten the carr ing belt [7] to the container [1] .
(Fig. 1)
▸
Push the hose [3] into the seating [9] and secure
it with the union nut
[26]
.
(Fig. 2)
▸
Push the hose [3] on to the shut-o valve [6] and
secure it with the union nut
[26]
.
(Fig. 2)
▸
Scre the spra tube
[5]
on to the shut-o
valve [6] . (Fig. 2)
▸
Screw the elbow
[27]
on to the spra tube
[5]
.
(Fig. 2)
Before start-up
Visual inspection:
Are container [1] , pump [2] , hose [3] , shut-o
valve
[ ],
piston manometer
[8]
and spra tube
[5]
and elbo [27] ith nozzle, undamaged?
Note:
Check particularl the connections con -
tainer – hose and hose – shut-o valve,
as ell as the condition of the pump
thread and spra tube.