7
16-296
70-180
3.
Push the Gripper Blocks toward each other and tighten the
Hex Bolts so that the Gripper Blocks squeeze the side flanges
of the omega rail.
Tighten Hex Bolts to 50 Lb-Ft (68 Nm).
To switch to opposite configuration:
1. Remove the screw pin from the shackle and out of the hole in the Hoist Plate.
2. If installed, remove the Omega Hoist Rig from the omega rail.
3. Replace the shackle and screw pin in the opposite hole in the Hoist Plate.
4. Flip the Omega Hoist Rig to the desired orientation.
5. Install on the omega rail as directed in the Set Up instructions.
4. You can now safely use the shackle on the corner of the Hoist
Plate as a hoist point.
WLL: 1000 Lbs (454 kg)
Opposite Side Configuration
The Omega Hoist Rig can be used with the hoist point on either
the right or the left side of the omega rail.
