6
16-296
70-180
Installation
Necessary Equipment
15/16” Socket
Torque Wrench
Anti-Seize Lubricant (such as Dow Corning Molykote 1000, Loctite Moly-50, Spider Black)
Set Up
1. Loosen the Hex Bolts to spread the Gripper Blocks as
far apart as possible. Apply a thin, even coating of
anti-seize lubricant to the bolt threads.
2. Place the Hoisting Plate against the back of the omega rail. Make sure the Gripper Blocks are spread out
far enough for the omega rail to fit between them. The Tap Block should be located in the inside cavity
of the omega rail.
