W-LINK-CAN
Product information
Page 2 of 4 Subject to technical changes
W-LINK-CAN_V1.70_PI_2018-08_EN
Writing conventions
Symbol
Meaning
CAUTION!
Avoid the described hazard: otherwise
minor
or
medium
physical injury or
damage to property will result.
WARNING!
Avoid the described hazard: otherwise there is danger from
electric voltage
that
could lead to death or
serious
physical injury.
For your safety
For safe operation and to avoid personal injury and equipment damage through operating error,
always read these instructions, become familiar with the device, and follow all safety instructions on
the product and in this document, as well as the safety guidelines of Wurm GmbH & Co. KG
Elektronische Systeme. Keep these instructions ready to hand for quick reference and pass them on
with the device if the product is sold.
Wurm GmbH & Co. KG Elektronische Systeme accepts no liability in case of improper use or use for
other than the intended purpose.
Target group
These instructions are intended for service technicians.
Intended use
The W-LINK-CAN receiver unit receives temperatures from W-LINKpro
wireless product temperature sensors for documenting and monitoring and
provides them to other devices via the CAN bus.
WARNING!
Danger to life from electric shock and/or fire!
Switch off the power to the entire plant when installing, wiring or removing! Otherwise a
mains voltage and/or external voltage may still be present even if the control voltage is
switched off!
The wiring of the device should be carried out only by a qualified electrician!
Use only the correct tools for all work!
Check all wiring after connection!
Take note of the maximum loads on all connections!
Never expose the device to moisture, for example due to condensation or cleaning
agents!
Take the device out of operation if it is faulty or damaged and is therefore compromising
safe operation!
Do not repair the device yourself! If required, send it in for repair with an exact
description of the fault!
CAUTION!
Electromagnetic interference can cause faults!
Use only shielded data lines and place them far away from power lines!
Software version and validity of the documentation
Software version Functional upgrade
Page
V1.5
2009-05 Basis of documentation
2011-04 Reception antenna folds to positioning angles 0°, 45° and 90°.
4
V1.70
2017-01 Front view, safety instructions, installation, technical data modified
1-4
2018-08 Documentation updates
This document automatically ceases to be valid if a new technical description is issued.
Manufacturer:
Wurm GmbH & Co. KG Elektronische Systeme, Morsbachtalstraße 30, D-42857 Remscheid
For further information, see our website at
