Programming start and stop time
Vintage 850 Peacock / Classic 850 Peacock – Edition: 02.10.2007
24
Press selection button 8 once again. Now the display shows a flashing ’2’.
This means ’stop time’.
Then the time will be displayed, here 18.30 o’clock (6.30 p.m.).
To reprogramme press selection button 8 - hold - and press selection button R. Release both
buttons. The digital display goes dark. Enter the start and stop time with eight digits.
Example: The jukebox should play random tracks from 09.00 in the morning to17.00 in the
afternoon..
To check the start time: press selection button 8. To check the stop time: press selection button 8
again.
If the Playstimulator does not work. Check if:
z
the clock is set correctly ?
z
start and stop time is programmed?
z
repeat time is set correctly (not 0)?
z
BGM play mode is disabled (ref. to next chapter).
z
credits are still in memory. Display the remaining credits by pressing button R. If so, delete with
button LT.
Exit the service program:
1.
Set the slide switch ‘service’ at the SCC unit to OFF.
2.
Press ‘LT’ button.
;
The changer starts an initialisation run. After this the jukebox is ready to operate.
Enter:
0 - 9 - 0 - 0 - 1 - 7 - 0 - 0
start time
stop time
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
