Installation manual
• Revision: 00 • 30/04/2021
© ABM Fahrzeugtechnik GmbH
Page 6 of 8
Caution:
During installation, make sure that there is a gap on
both sides between top and bottom and no surface
touches anything.
Insert the handlebar back into the risers, adjust as
desired and fasten.
Tightening torque 25 Nm
Push the reduction sleeves onto the handlebar on the
left and right side.
Attach the handlebar extensions provided on both
sides and fasten.
Caution: It is not possible to attach another
handlebar end to the handlebar.
Push the switch units onto the handlebar until the
handlebar extensions protrude approx. 2-4mm.