WUNDER SA.BI.SRL EN USER MANUAL
RA(WU150) REV. 02- 10/01/2017
20
Printing speed (mm/s)
75 mm/s
Dimensions (L x W x H )
120 x 80 x 50mm
Operating temperature (
℃
)
0
℃
to 50
℃
Operating humidity (%)
20% to 85% (no condensation)
Interface
Conform to RS232
Voltage range (adaptor only)
12V 2A
SHOCK HAZARD WARNING
The printer and power supply should never be operated in a location where either one can get wet.
Personal injury could result.
MEDIA WARNING
Always use high quality approved paper print roll. The approved product can be ordered from your dealer.
RELOADING HINT
If printer runs out of paper roll while printing, switch the power off and reload paper roll. Power on and
print again.
17.3. ERROR MESSAGES
Problem
Solution or Reason
Status Indicator does not light when power switch is
turned to ON (I) position.
Check the power connections from AC outlet to the
printer power supply.
Status indicator illuminated (green light), but the
printer will not print.
Check interface cable connections from the scale to
printer.
Make sure the top cover is closed and locked.
Printer paper jammed.
Reset the paper roll. Please refer to “
CHANGING
THE PAPER ROLL”.
Status Indicator is flashing green.
Paper roll is out. Reload a new source of paper roll
so the printer can continue printing. Please refer to
“
CHANGING THE PAPER
ROLL”.
