WUNDER SA.BI.SRL EN USER MANUAL
RA(WU150) REV. 02- 10/01/2017
11
Set parameters of the scale interface on the connected device. It is
not possible to change the scale parameters.
Baud rate: 9600 bps
Parity check: None
Data length: 8 bits
Stop bit: 1 bit
Handshake: RTS/CTS
Data code: ASCII
Serial RS232
Piedino
Segnale
2
TXD
3
RXD
5
GND
Connecting with PC
•
Start Hyper Terminal
•
Start Hyper Terminal program from clicking
•
Start Menu → Programs → Accessories → Communication → Hyper Terminal.
•
New Connection Description
•
Give new connection a name then clicks OK.
•
Select Your COM Port
•
Click Connect to select your COM port. Usually there’s only one option for select. Then click
OK.
•
Port Settings
•
Click Bits per second to set up rate at 9600, Data bits at 8, Parity at None, Stop bits at 1 and Flow
control at Hardware. Then click OK to complete your setting.
•
Output Data
•
When press the PRINT key to output data from scale to PC or an Optional Printer.
Connector RS232
