PEQ2 Input Module
A
Gain Switch
- At the top of each channel PEQ2
module is a red winged knob which controls a 12-
position switch. Each Position will show two values.
The “Line” gain level is circled whereas the “Mic”
gain level is not circled. Unity gain for the Line level
is at “0”.
HiZ range is the four most clockwise positions of
the Line gain (-24 through -42) has higher input
impedance ideally suited for “Direct In” instruments
such as Bass or keyboards. These four line
positions are can also be used as an alternate mic
input using a different transformer.
B
High Frequency control
- The high frequency is
adjusted using this dual concentric knob. The outer
black knob determines the frequency at which
boost or cut will occur. This knob also has an off
position. The inner silver knob provides
continuously variable BOOST or CUT from 0 to +/-
20 dB of the selected frequency. This knob should
be set to the 6 o’clock position to achieve no boost
or cut.
C
Mid control
- The Mid frequency is adjusted using
this dual concentric knob. The outer black knob
determines the frequency at which boost or cut will
occur. This knob also has an off position. The inner
silver knob provides continuously variable BOOST
or CUT from 0 to +/- 20 dB of the selected
frequency. This knob should be set to the 6 o’clock
position to achieve no boost or cut.
Wunderbar Super D User's Manual Rev. 1, Dec. 2018
6
Summary of Contents for Wunderbar Super D
Page 1: ...Wunderbar Super D Operations Manual Wunderbar Super D User s Manual Rev 1 Dec 2018 1 ...
Page 10: ...Control Room Master Section Wunderbar Super D User s Manual Rev 1 Dec 2018 10 ...
Page 21: ...Wunderbar Super D User s Manual Rev 1 Dec 2018 21 ...
Page 23: ...Depth and Height of Console Wunderbar Super D User s Manual Rev 1 Dec 2018 23 ...
