FLEXCOMM 2000
(P-2000/C-2000/RT-2000
)
OPERATOR’S MANUAL
A. Flashport
Mode
The flashport mode is one of the mode options available on the Transceiver Maintenance page.
This mode allows the technician to upgrade the embedded software within the internal transceiver.
(1) Select the transceiver to perform the flash upgrade. Highlight START and press enter
to begin. Perform the flash upgrade.
Data mode, WED service mode and extended protocol modes are accessed using the same procedure.
B. Digital Pot Tuning Mode
(1) This page allows a technician to adjust the digital pot settings on the P-2000. The
cursor knob allows the selection of the pot name field, pot value field, the back
button, and the save button Turning the value knob while the pot name field is
selected shall enumerate all the pot names: MIC IN 1, MIC IN 2, SIDETONE 1,
SIDETONE 2, HDSET OUT 1, HDSET OUT 2, SPEAKER, and ALERT TONE.
Turning the value knob while the pot value field is selected enumerates the range of
values: 0-127.The display below shows the layout for this page.
Publication No. 150-049105
Page 37 of 40
Rev. D
Operators Manual
Oct 2007
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations. When exporting,
diversion contrary to U.S. law is prohibited.