9.Printhead physical calibration
[About printhead calibration]
To get good print quality, it is necessary to do the printhead calibration.
If the printhead is not adjusted, bandings or other problem will appear when
printing,which will lower the print quality.
1
2
Loosen the 8pcs of screws on the
sliding block, up and down move the
carriage, to make the left side and
right side of printhead is parallel
with the print platen.
Power on, enter [MENU] to go into
[ADJUST] interface.
[MENU]
MENU
ADJUST
21
8pcs of screws
Summary of Contents for R180E Series
Page 40: ......
