User Manual
z
Save as .IRI file or .JPG file to the appointed directory path
z
Open as new .IRI or .JPG file
z
Save as .IRI file or .JPG file and open it
Note: The file format is .JPG
Auto focusing command
When playing infrared video, use this command under Video Menu or Press Ctrl + F to
perform auto functions operation on camera.
Play command
Use this command or press
to play infrared video. If it is play mode, perform this
command to change it to pause mode.
Pause Command
Use this command or press
to pause infrared video. If it is pause mode, perform this
command to change it to play mode
Forward command
User this command or press
to make the video go forward by one frame when playing
video.
Backward command
Use this command or press
to make the video go backward by one frame when
playing video.
Record command
Use this command or press
to record the video capture and save it in appointed
directory. The default saving directory is in the sub-directory of capture under installation
directory. Computer system will denominate the video file automatically.
Perform this command again after stopping record.
Transferring Data from the Camera to PC
Before transferring data from camera to PC, ensure that the PC offers USB2.0 interface
and the USB driver for the camera has been successfully installed in the PC.
Power on the camera.
Press the softkey labeled “File” to reveal the menu “Storage”.
Press the softkey labeled “
↑
” and “
↓
” to select “Storage”, and “OK” to confirm.
Press the softkey labeled “UFlash” to select the storage medium as UFLASH. Press the
softkey labeled “SD Card” to select the storage medium as SD Card.
•
If the storage medium is set as “UFLASH”, no hint will display on either the PC or the
camera screen. Image export, image analysis, live video recording etc. can be done in
22
Summary of Contents for EasIR-1
Page 29: ...User Manual 26...
