pH 3310
Operation
45
ba75802d06
05/2017
4.5
Data memory
You can transmit measured values (datasets) to the data memory:
Manual storage (see section 4.5.1)
Automatic storage at intervals (see section 4.5.2)
Each data storage process transmits the current dataset to the inter-
face at the same time.
Measurement dataset
A complete dataset consists of:
ID number
Date/time
Measured value of the connected sensor
Measured temperature value of the connected sensor or manually
set temperature
AutoRead info:
AR
appears with the measured value if the
AutoRead criterion was met while storing (stable measured value).
Otherwise, the
AR
display is missing.
Calibration evaluation: +++, ++, +, -, or no evaluation
Storage locations
The pH 3310 meter has two measurement data memories. The mea-
sured values recorded either manually or automatic are stored sepa-
rately in individual measurement data memories.
4.5.1
Manual storage
You can store a measurement dataset to the data memory as follows.
The dataset is at the same time output to the interface:
Data memory
Maximum number of datasets
Manual data storage
500
Automatic data storage
5000
1
Press the
<STO>
key shortly.
The menu for manual data storage appears.
