Operation
Oxi 3310 IDS (Oxi 3315)
16
ba75944e02
10/2014
4.1.4 Connectors
4.1.5 Sensor info
You can display the current sensor data and sensor settings of a connected
sensor at any time. The sensor data are available in the measured value
display with the
<F1>
/[
Info
] softkey.
1 Digital sensors (Oxygen)
2 USB B (device) interface
3 Service interface
CAUTION
Only connect sensors to the meter that cannot return any volt-
ages or currents that are not allowed (> SELV and > current
circuit with current limiting).
WTW IDS sensors and IDS adapters meet these requirements.
1.
In the measured value display:
Display the sensor data (sensor name, series number) with [
<F1>
Info
].
3
1
2
O
2
mg/l
7.92
25.0
°C
01.02.2014
08:00
Info
USB output
