Multi 350i
Operation
19
4.2.4
Example 2 on navigation: Setting the date and time
The measuring instrument has a clock with a date function. The date
and time are indicated in the status line of the measured value display.
The indication can be switched off. When storing measured values and
calibrating, the current date and time are automatically stored as well.
The correct setting of the date and time and date format is important for
the following functions and displays:
!
Current date and time
!
Calibration date
!
Identification of stored measured values.
Therefore, check the time at regular intervals.
Note
After a fall of the supply voltage (empty batteries), the date and time are
reset to 01.01.2003, 00:00 hours.
Setting the date, time
and date format
The data format can be switched from the display of day, month, year
(
dd.mm.yy
) to the display of month, day, year (
mm/dd/yy
or
mm.dd.yy
).
1
In the measured value display:
Open the system menu by pressing
<MENU/ENTER>
for a
long time (approx. 1 s).
The instrument is in the setting operating mode.
2
Select and confirm the
System
/
Clock function
menu with
<
▲
> <
▼
>
and
<MENU/ENTER>
.
The setting menu for the date and time opens up.
3
Select and confirm the
Time
menu with
<
▲
> <
▼
>
and
<MENU/ENTER>
.
The seconds are highlighted.
4
Change and confirm the setting with
<
▲
> <
▼
>
and
<MENU/
ENTER>
.
The minutes are highlighted.
Time
:
14:53:40
Date
:
30.10.03
Date format
:
dd.mm.yy
System
Summary of Contents for Multi 350i
Page 10: ...Overview Multi 350i 8...
Page 82: ...Operation Multi 350i 80...
Page 106: ...Appendix Firmware Update Multi 350i 104...
Page 107: ......
