Interface for the Modbus RTU
MIQ/2-MOD
18
ba75973e01
07/2012
Creating the assignment
of sensor numbers
You want to install an IQ S
ENSOR
N
ET
system and, at the same time, to
create a specific sequence of sensor number assignments to the sen
-
sors.
Changing the assignment
of sensor numbers
You want to change the assignment of sensor numbers to the sensors
in an already running IQ S
ENSOR
N
ET
system.
Creating the identical
assignment of sensor
numbers in several
systems
You want to install several identical IQ S
ENSOR
N
ET
systems and, at
the same time, to create the same sequence of sensor number assign
-
ments to the sensors in all systems.
1
Carry out a system start without any sensors (see system oper
-
ating manual).
2
Connect the sensors to the system in the required order. With
each sensor wait until the system has recognized the sensor.
1
Unplug all sensors from the IQ S
ENSOR
N
ET
.
When the inactive datasets are deleted, all settings for the
sensors are deleted as well.
2
Delete all inactive datasets in the list of sensors (see System
operating manual, chapter
Deleting inactive datasets of sen
-
sors
).
3
Connect the sensors to the system in the required order. For
each sensor, wait until the sensor is recognized by the system
(see System operating manual, chapter Installation).
1
Carry out a system start without any sensors (see System
operating manual, chapter Installation).
2
Connect the sensors to the system in the required order. For
each sensor, wait until the sensor is recognized by the system
(see System operating manual, chapter Installation).
3
Repeat steps 1 and 2 for all other systems and, while doing so,
keep to exactly the same order when connecting the sensors.