Operation
Cond 730
46
4.5.4 Clearing the storage
This function can erase the stored data records. 800 mem-
ory locations will then become available again.
Note
The
Clear store
function only appears if data records have
already been stored in the storage. Otherwise, the conduc-
tivity meter automatically changes to the measuring mode.
In order to delete all the data records, proceed as follows:
Note
The calibration data remain in the storage and can be called
up via the calibration protocol.
1 Switch off the instrument.
2 Press and hold down the
s
key.
3 Press the
e
key.
The
display test
appears briefly on the display.
4 Confirm the clearing process by pressing
g
.
Pressing any other key stops the clearing process
and the data records remain in the storage.
Summary of Contents for inoLab Cond 730
