wtw inoLab Cond 730, Operating Manual

Page: 42 / 80

Operation Cond 730
42
Note
If you want to find a specific parameter (e.g. date), proceed
as follows:
1 Press the
r
key repeatedly until Sto disp appears
on the display.
2 Press the
g
key.
A measured value appears on the display.
The I. D. number of the data record appears for
approx. 2 s.
3 After 2 s the respective temperature of the data
record appears on the display.
4 Select the parameter (e.g. date) by pressing
g
.
5 Press
8
or
2
repeatedly until the required
date appears on the display.
After approx. 2 s, the temperature of the displayed
measured value appears.