WTI RPC-4850-8, User Manual, Page: 29 / 59

5-11
Confi guration
5.3.3. Circuit Parameters Menus
The Circuit Parameters Menus are used to define Circuit Names, Circuit
Passwords, boot/sequence delay times and Power-Up Defaults for each of the
RPC’s Switched DC Circuits.
• Web Browser Interface: Click the "Setup" button to access the
configuration menus, then click the "Circuit Parameters" button. The
Circuit Parameters Menu will be displayed as shown in Figure 5.7.
• Text Interface: Type
/P
n and then press [Enter] (Where n is the
number or name of the circuit you wish to configure.) The Circuit
Parameters Menu will be displayed as shown in Figure 5.8.
Note that in this case, the major difference between the Web Browser Interface
and Text Interface is that the Web Browser Interface allows you to select
parameters for all circuits from a single menu, whereas the Text Interface
includes a separate menu for each circuit.
Figure 5.7: Circuit Parameters Menu - Web Browser Interface
CIRCUIT #1 PARAMETERS:
1. Circuit Name: (undefined)
2. Password: (undefined)
3. Boot/Seq. Delay: 0.5 Secs
4. Power Up Default: On
Enter Selection,
Press <ESC> to Exit ...
Figure 5.8: Circuit Parameters Menu - Text Interface (Circuit 1 Shown)