5-8
RPC-4850-8N Remote Power Controller - User’s Guide
•
Inactivity Timeout:
Determines how long the RPC will wait for
additional commands during periods of inactivity. When the Timeout
Period elapses, the user will be disconnected from command mode.
(Default = 2 Minutes.)
•
Command Confirmation:
When enabled, the RPC will display
a confirmation prompt before executing certain commands. When
disabled, the prompt will be suppressed and commands will be executed
immediately. (Default = On/Enabled.)
•
Automated Mode:
When enabled, the RPC will execute On, Off, Boot,
and exit commands without displaying a confirmation prompt, status
screen or confirmation messages. For more information, please refer to
Section 6.4. (Default = Off.)
Note:
When this option is enabled, security functions are suppressed,
and users are able to access configuration menus and control circuits
without entering a password. If security is a concern and the
Automated Mode is required, it is recommended to use the IP Security
feature (Section 5.3.4.1) to restrict access.
•
Manual Switch Button:
Enables and configures the Default Button’s
manual circuit control function, but does not effect the Default Button’s
ability to reset parameters to default values. (Default = "On".)
▪
Off:
Disables the manual circuit control function.
▪
On:
Enables manual circuit control. When Default is pressed and held
for three seconds, all circuits will be toggled On or Off.
•
Command Prompt:
Allows the Text Interface command prompt to be
set to either "RPC, "IPS", "NPS", or "NBB." (Default = RPC.)
Summary of Contents for RPC-4850-8
