10.3. Control Commands
These commands are used to switch A/B lines at each circuit, set
circuits to default status, and reset the network interface.
/A <n> Switch Circuit "n" to Line "A"
Switches the target circuit(s) to Line "A". Note that this
command can be used to switch one circuit, a combination of
circuits or all circuits to the "A" state. For more information,
please refer to Section 7.2.1.
Command Format:
/A <n>
[Enter]
Where
n
is the number or common name of the target circuit,
and can either indicate a single circuit, a combination of
circuits, or all circuits as described in Section 7.2.1.
Command Arguments:
,y
Suppress Confirmation (Sure) Prompt. For example,
"
/A 1,y
" switches circuit 1 to Line "A"
without
displaying the confirmation prompt.
Response:
Displays message indicating circuit(s) to be
switched, waits for user confirmation (unless suppressed),
switches target circuit(s) to "A", then displays Status Screen.
Command Availability:
System and User.
/B <n>
Switch Circuit "n" to Line "B"
Switches the target circuit(s) to Line "B". Note that this
command can be used to switch one circuit, a combination of
circuits or all circuits to the "B" state. For more information,
please refer to Section 7.2.1.
Command Format:
/B <n>
[Enter]
Where
n
is the number or common name of the target circuit,
and can either indicate a single circuit, a combination of
circuits, or all circuits as described in Section 7.2.1.
Command Arguments:
,y
Suppress Confirmation (Sure) Prompt. For example,
"
/B 1,y
" switches circuit 1 to Line "B"
without
displaying the confirmation prompt.
Response:
Displays message indicating circuit(s) to be
switched, waits for user confirmation (unless suppressed),
switches target circuit(s) to "B", then displays Status Screen.
Command Availability:
System and User.
10-4
PLS-345 - Physical Layer Switch; User's Guide
Summary of Contents for PLS-345
