Original Operating Instructions
BATD0050-ES-1-400-1
Installation
O_BATD0050-ES-1-400-1_V2.6_GB
Page
44
of
72
3.5.2.7 External Temperature Sensor
Required material:
•
Temperature sensor (e.g. Pt100) (not included in scope of delivery)
Figure 21: Cable routing to terminal strip (-X17)
Pos.
Description
1
Terminal strip (-X17)
Procedure:
1.
Locate
the terminal strip (-X17) (Figure 21).
2.
Connect
the lines to the terminals (-X17.3) and (-X17.4).
3.6
After Installation
After installation the following items must be checked:
•
No waste packaging, waste and tools were left in the product.
•
No transportation and installation damages occurred.
•
Connection lines and terminals are properly connected and the torque has been
checked.
•
If any of the foregoing is not ensured, the product may be damaged. The
manufacturer disclaims any and all liability for damages resulting from a failure
to following the listed steps in this Section 3.6.
Summary of Contents for BATD0050-ES-1-400-1
Page 72: ......
