1-S54
L3130 · L3430 · L3830 · L4630 · L5030, WSM
ENGINE
Replacing Connecting Rod Small End Bushing
(A) (When removing)
1. Press out the small end bushing with a connecting rod small end
bushing replacing tool.
(B) (When installing)
1. Clean a new small end bushing and bore, and apply engine oil to
them.
2. Press fit a new bushing, taking due care to see that the
connecting rod hole matches the bushing hole.
W1032140
Piston Ring Gap
1. Insert the piston ring into the lower part of the liner (the least worn
out part) with the piston.
2. Measure the ring gap with a feeler gauge.
3. If the gap exceeds the allowable limit, replace the ring.
W1032246
Clearance between Piston Ring and Groove
1. Remove carbon from the ring grooves.
2. Measure the clearance between the ring and the groove with a
feeler gauge.
3. If the clearance exceeds allowable limit, replace the ring since
compression leak and oil shortage result.
4. if the clearance still exceeds the allowable limit after replacing the
ring, replace the piston.
W1032489
Top ring
Factory
spec.
D1503-M
0.20 to 0.35 mm
0.0079 to 0.0138 in.
D1703-M
D1803-M
V2203-M
V2403-M
0.20 to 0.40 mm
0.0079 to 0.0157 in.
Allowable limit
1.25 mm
0.0492 in.
Second ring
Factory spec.
0.30 to 0.45 mm
0.0118 to 0.0179 in.
Allowable limit
1.25 mm
0.0492 in.
Oil ring
Factory spec.
0.25 to 0.45 mm
0.0098 to 0.0177 in.
Allowable limit
1.25 mm
0.0492 in.
Second ring
Factory
spec.
D1503-M
0.093 to 0.120 mm
0.0037 to 0.0047 in.
D1703-M
D1803-M
V2203-M
V2403-M
0.093 to 0.128 mm
0.0037 to 0.0050 in.
Allowable limit
0.2 mm
0.0079 in.
Oil ring
Factory spec.
0.020 to 0.060 mm
0.0008 to 0.0021 in.
Allowable limit
0.15 mm
0.0059 in.
KiSC issued 02, 2007 A
Summary of Contents for L3130
