background image

Bulletin # 061 
1 Page 
September 7, 2006 

Cutting Deck Baffle-System Option 

Subject

New optional deck baffle system 

Units
Affected:

All three bladed machines 

Situation:

Consistent with our commitment to continuous improvement, an 
optional baffling system has been developed for purchase as 
an upgrade to cutting decks.  This system is designed to further 
improve cut quality, air flow and discharge.  This is an 

optional

upgrade with the exception of Mid-Mount Z mowers - each of 
these mowers will have the opportunity to obtain the upgrade 
free of charge (parts only) 

The Fix: 

The kits will be available beginning September 18, 2006.  Order 
as needed using the following information.  Current MSRP for 
each kit is $95.00

 Mid-Mount 

mowers: 

 

48” deck – 95430006 

 

52” deck – 95440007 

 

61” deck – 95450006 

 

All other mower models: 

 

48” deck – 95430005 

 

52” deck – 95440006 

 

61” deck – 95450005 

Claim
Procedure:  

For Mid-Mount Z mowers

: Purchase and install the kit.  File 

warranty claim for parts only 

 

For all other models

:  None - optional upgrade 

29

Summary of Contents for WSES36





































































Reviews: