Wren V5BT14, Setup Manual

Page: 10 / 64

10
To pair additional devices with
your V5BT, simply follow the
instructions under “Pairing with
your V5BT” on pages 8-9.
When the Power button is pressed
to turn the speaker on from Sleep
or Standby mode, the V5BT will
look for the most recently paired
device that was connected to the
speaker. If that device is available,
the V5BT will reconnect to it. If the
last paired device is not available,
the V5BT will continue to search
for the next most recently paired
device. It will connect with the
most recently paired device that
it finds.
When you wish to connect to a
specific paired device, press and
hold the Source button on the
front of the speaker for three (3)
seconds. The
Bluetooth indicator
will blink amber two times per
second indicating that the V5BT
is trying to connect to a paired
device. Select V5BT14 on the
source device. The
Bluetooth
indicator will change to solid
blue when an active connection
is established
(Figure 5)
.
Many households (and many individuals) have multiple Bluetooth -equipped devices that
they use for music. The Wren V5BT can “remember” pairings with up to six different
Bluetooth devices, eliminating the need to go through the initial pairing process every
time you switch devices.
Using multiple devices on your V5BT