Wren 10MXTA series Operation And Maintenance Manual Download Page 1

Page: 1 / 50

OPERATION

AND

MAINTENANCE

MANUAL

IMPORTANT INSTRUCTIONS ON RECEIPT (OPEN PACKAGE INSPECTION)

①

②

③

④

⑤

⑥

⑦

ITEM

BODY

360

180

WIVEL JOINT

QUICK

COUPLING

FIXING

HOOK

360

SWIVEL

REACTION

ARM

SQUARE

DRIVE

RETAINER

NAME

SAFETY FIRST!

The hydraulic torque wrench is a power tool. Read all the instructions, warnings and

cautions before every operation. Comply with the safety precautions to avoid personal

injury or equipment damage while operating this tool! Neither WREN,nor its distributors

are responsible for damage to the tool caused by unsafe and/or

faulty operations.

Carefully inspect all components for shipping damages. If any shipping damage is

found, notify the carrier at once. Shipping damage is NOT covered by warranty.

The carrier is responsible for all repairs.

alloy

and

super high

strength

alloy

steel

for

increased

strength

intensity

and

durability of the

MXTA

series

Square

Drive

Torque

Wrenches

It is operating manual of MXTA and XLCT series Torque Wrench, please read carefully

with following instruction, warning and Caution before using Tool.

MXTA

AND

XLCT

HYDRAULIC

TORQUE

WRENCHES

tool

Double acting hydraulic design, Can lock and loosen the bolt connection, widely suitable for

PRODUCTIONS DESCRIPTION

QUICK RELEASE ARM

①

②

③

④
⑤

⑥

⑧

⑦

FIG1

large torque bolt and disassembly, High repeatability, a precise design is with ac3%.

Summary of Contents for 10MXTA series


















































Search results

Summary of Contents for 10MXTA series

Reviews:

Related manuals for 10MXTA series

Brands by name

Popular brands

Wren 10MXTA series, Operation And Maintenance Manual

Search results

Summary of Contents for 10MXTA series

Reviews:

Related manuals for 10MXTA series

Brands by name

Popular brands