9
ATWS
Series
Hydraulic Torque Wrench
splines
Button
Drive Retainer
Square Drive
.
2. Twist the drive and bushing until the ratchet spline can be engaged.
3. Push the drive through the ratchet.
4. Depress drive retainer button, engage retainer with drive and release button
to
lock.
Figure 5
“Locked-On”
Should the hydraulic torque wrench be “locked-on” after the
final cycle :
1. Push the pump remote control advance button to
build pressure.
2. Maintain this pressure and push the release lever
located on the side of the tool.
3. Release the remote control advance button, while
continuing to push down on the release lever.
4. Remove the hydraulic torque wrench.
Figure 6
R
emoving the square drive:
Disengage th e drive retaine r assem b ly by depressing the center round button and
b
y gently pulling on the square end of the square drive. The square drive will
then slide out.
Inserting the square drive:
1 . P lac e the drive in the desired direct ion and engage the drive and bushing
