Page 7
WALL / SHALLOW BASE UNIT
700 - 800 Assembly Guide
Corner Gusset
Detail
View though
Back Panel
Pilot
hol
e
M
Step 21.
Drill a small pilot hole through the centre of the corner gussets,
through the back of the unit. Use this hole at the end of the
process to screw through and into the wall. Cover the screw
heads using the cover caps
(M)
provided.
Screws for fixing to walls are not provided
as these vary
depending on your wall material and construction. Ensure
appropriate fixings for wall constructions are used.
Step 20.
Secure corner gussets to the top left and right hand side of the
wall unit using 4 x 15mm screws
(L)
per plate.
SHALLOW BASE UNITS ONLY
for WALL see pages 5 & 6
`
K
Step 22.
Screw into any side units using the provided 2x 30mm
screws
(K)
to secure the unit. Screw just to the rear of
the hinge plate then place a cover cap on the head to
conceal it.