Page 6
For Internal Use: FI.WR.INS.035_WKIN00125_MULTI_700-800_WALL_ShallowBASE_Rev8.indd
WALL UNITS ONLY
Step 16.
Measure appropriately and
attach the 2 x hanging bracket
plates onto the wall screwing
through the provided holes into
your wall.
Step 17.
Hang the unit using the
brackets to hook onto the
plate as shown
Hanging Bracket
Plate
Step 18.
Using points a, b & c adjust the unit to suit.
Step a.
Rotate the screw clockwise
to move the unit up.
Anti-clockwise for down.
Step b.
Adjust the depth
using centre screw.
Step c.
Screw the red screw until it
touches the plate to lock
in position.
Hanging
Bracket
viewed through
Back Panel
b
C
c
a
a
b
K
Step 19.
Screw into any side units using the provided 2x 30mm screws
(K)
to secure the
unit. Screw just to the rear of the hinge plate then place a cover cap on the head to
conceal it.
Screws for attaching to walls are not provided as these vary depending on materials,
thickness and construction. Ensure appropriate fixings for wall construction are used.