Page 9 of 11
SAME:
The
SAME
button places the associated antenna into the
SAME
mode, this
means the antenna will scan targets in the Same Lane Target Zone. A mode
can be set without the antenna being in transmit mode.
OPP:
The
OPP
button places the associated antenna into the
OPP
mode, this
means the antenna will scan targets in the Opposite Lane Target Zone. A
mode can be set without the antenna being in transmit mode.
MENU:
The
MENU
button opens the operator menu, when in the menu, the
↑
and
↓
buttons are used to change the value of the currently displayed option,
with subsequent presses of the menu button changing the current setting
that is displayed. To exit the operator menu, press any of the mode buttons.
PLATE READER:
The
PLATE READER
button opens the plate reader menu, once the menu is
open you can toggle the display of the reader, as well as set a BOLO plate for
the system to look out for. The plate reader doesn’t require power to run,
and therefore can just have the display toggled and it will work.
HELP:
The
HELP
button opens a window that links to the help manual stored
externally, this manual describes everything in detail. The close button at
the bottom can be used to close the manual.
UI SETTINGS:
The
UI SETTINGS
button opens the UI settings menu, from within this menu
you can change the UI scale of the radar, remote, and the plate reader.
There is also a slider which allows you to change the safezone size, creating
an invisible border around the edge of your screen. Once you have set the UI
how you want, press the close button at the bottom.
