Page 8 of 11
REMOTE
CONTROL
USAGE
REMOTE
BUTTON
FUNCTIONS
Toggle Display:
This button is used to toggle the display state of the radar unit. Once the
display has been enabled, the green button labelled “PWR” must be pressed
to power on the unit. Pressing the toggle display button when the unit is
powered on will not power the unit off.
XMIT | HOLD:
The
XMIT | HOLD
button is the primary way of making the associated
antenna work, when pressed, it either places the antenna into transmit
mode (
XMIT
) or hold mode (
HOLD
). When the antenna is placed into
transmit mode, the
XMIT
icon will be illuminated. When the antenna is
placed into hold mode, the
XMIT
icon will be switched off and the fast target
window will display “HLd”.
↑ and ↓:
The
↑ (up) and ↓ (down)
buttons (which are on the
XMIT | HOLD
buttons)
are used when in the operator menu to change the value of the currently
displayed option.
Front
OPPOSITE
(Target Zone button)
Rear
OPPOSITE
(Target Zone button)
Front
SAME
(Target Zone button)
Rear
SAME
(Target Zone button)
Front transmit/hold
button
Rear transmit/hold
button
Operator menu
button
Help manual button
Plate reader menu
button
UI settings menu
button
