Page 11 of 11
PLATE
READER
VOLUME
This option allows you to change the volume of the plate
reader, t
he ↑ and ↓ buttons are used to cycle through the
6 settings: Off, 1, 2, 3, 4, and 5. The plate reader audio is off
when set to Off and loudest when set to 5. Press any of the
four Target Zone buttons to exit the Operator Menu.
UNIT
OF
MEASUREMENT
This option allows you to change the unit of measurement,
as the Wraith ARS 2X can use either MPH or KMH for all
calculations and display. T
he ↑ and ↓ buttons are used to
cycle through the 2 settings: USA (MPH) and INT (KMH).
Press any of the four Target Zone buttons to exit the
Operator Menu.
FAST
SPEED
LOCK
Note: this option will only be displayed if the server owner
has enabled it in the config file
. This option allows you to
change the fast speed lock state, with it set to on, the radar
will automatically lock a speed if it is above the limit set in
the next option. When it is off, the radar will function like
normal. Press any of the four Target Zone buttons to exit the
Operator Menu.
FAST
SPEED
LOCK
LIMIT
Note: this option will only be displayed if the server owner
has enabled it in the config file
. This option allows you to
change the speed limit required for a vehicle to pass before
it is automatically locked by the radar. T
he ↑ and ↓ buttons
are used to cycle through the settings and range from 5 –
200 in steps of 5. Press any of the four Target Zone buttons
to exit the Operator Menu.