PV850
World Precision Instruments
7
Mode
– This indicates if the pump mode, either Timed or Manual.
Injection Button (Manual)
– Use this button to manually initiate an injection.
Settings Screen
ou an
r n t s tt n s ar a ( otto r
t orn r) o t
screen to access the settings menu. This area also shows the status of the warning
tones.
Setting Menu
Mode
Units
Save/Load Protocols
Self Test Button
Port Status (On/Off)
Back Button
Fig. 5—From the Settings menu, you can save and load parameters, choose the mode, set
the units, toggle the MICRO-ePORE™ off or on, silence the tones, and toggle the injection
port off or on.
Mode
– Choose either the Manual or the Timed checkbox to determine the injection
mode. Manual control allows for injection pressure to be applied for as long as the
foot switch is fully depressed. Timed injections use the duration set on the main screen.
Units
– Select one of the checkboxes to set the display to either PSI or kPa.
Save/Load Protocols
– The
PV850
can store your three favorite parameter sets
( roto o s) On t a n s r n s t t ara
t rs as s r
n r ss on o
the
Save buttons. For example, press SAVE1 to save the parameters as Protocol 1. To load a
s t o sa
ara
t rs (a roto o ) r ss t a ro r at O utton
nu
r o
the loaded protocol displays in the box in the upper left corner of the main screen.
Self Test Button
– The Self Test runs whenever the unit is powered on. To initiate a test
manually, press this button. It runs a series of programmed diagnostics and displays
results on the screen.
Port Status
– Port ON indicates that the injection port is enabled. To disable the port,
touch the Port ON button. The button will change to Port OFF. To re-enable the port,
press the Port OFF button, and the button will change to Port ON.
Back Button
– Touch the Back button to return to the main screen.
