PIMT201
World Precision Instruments
13
1. Remove a single dust cover from the nosepiece (
Fig. 38
). When it is removed, an
opening is revealed (
Fig. 39
). For ease of installation, that opening should point
straight up through the opening on the microscope stage.
Fig. 38—Removing dust cover to mount objective
Fig. 39—Position for mounting objective
2. Remove the desired objective from its shipping case (
Fig. 40
). Then, remove the
captive dust cover (its cap) (
Fig. 41
).
Fig. 40—Objective out of case
Fig. 41—Objective with cap removed
3. Insert the objective into the nosepiece and rotate it clockwise. Finger tighten it
(
Fig.42
). DO NOT OVERTIGHTEN. Finger tight is sufficient!
Fig. 42—Installing the objective
Summary of Contents for PIMT201
Page 2: ......
