WPG STT1, Instructions Manual

Page: 7 / 18

Rev 9.0/1-18 5 STT1: #35151
FIGURE 3: SUPPORT LEG ASSEMBLY
4) Assemble the support leg assembly as shown in Figure 3. Do not over-tighten moving parts:
They should move with enough resistance to maintain position unless movement is
intentionally initiated.
1) 1/4-20 X 1/2" HEX HEAD BOLT − GRADE 5 16) SHORT VERTICAL TUBE OF SUPPORT LEG ASSEMBLY
2) 1/4" SAE FLAT WASHER 17) TUBE END FOR 2" X 2" X 11-12 GAGE TUBING − 3/8-16 TAP
3) SUPPORT LEG STOP 18) 3/8-16 X 2-7/8" SWIVEL LEVELING FOOT
4) 3/8-16 NYLON LOCK HEX NUT − GRADE 8 19) 5/16-18 X 2-3/4" HEX HEAD BOLT − GRADE 5
5) 3/8" SAE FLAT WASHER 20) END PLUG FOR 2" X 2" X 0.120" TUBING
6) NYLON SPACER 21) PIVOT
7) SUPPORT LEG LATCH 22) 5/16-18 X 3" FLAT HEAD SOCKET BOLT
8) 5/8-11 NYLON LOCK HEX NUT − GRADE 8 23) 5/16-18 X 3" HEX HEAD BOLT − GRADE 5
9) SHORT LINKAGE TUBE 24) 5/16-18 X 2-3/4" HEX HEAD BOLT − GRADE 5
10) 3/8-16 X 1-1/4" HEX HEAD BOLT − GRADE 5 25) TILT LATCH HANDLE
11) 3/8" NYLON FLAT WASHER 26) 5/8" SAE FLAT WASHER
12) LONG VERTICAL TUBE OF SUPPORT LEG ASSEMBLY 27) 5/8-11 X 5-1/2" HEX HEAD BOLT − GRADE 5
13) HORIZONTAL TUBE OF SUPPORT LEG ASSEMBLY 28) 5/16" X 1" X 1/4-20 SOCKET HEAD SHOULDER BOLT − 140 KSI
14) 5/16" SAE FLAT WASHER 29) 5/16" X 3/8" X 1/4-20 SOCKET HEAD SHOULDER BOLT − 140 KSI
15) 5/16-18 NYLON LOCK HEX NUT − GRADE 8 30) TILT LATCH SPRING