Rev 9.0/1-18
13
STT1: #35151
MAINTENANCE
I
NSPECTION
S
CHEDULE
Perform inspections routinely, according to the following frequency schedule:
Every-Use Inspection
• Check the table top surface for anything that may damage the load.
Frequent Inspection
(
following every 20-40 hours’ use; or whenever table is out of service for 1 month or more)
• Examine the table’s structure for visual damage.
If any deficiency is detected during the inspection, correct it before using the table and perform
the Periodic Inspection to follow.
Periodic Inspection
(
following every 250-500 hours’ use; or whenever table is out of service for 1 year or more)
• Examine the entire table for external evidence of looseness, excessive wear, deformation,
cracks, excessive corrosion, dents to structural or functional components, cuts, or any
deficiency which might constitute a hazard.
• Keep a written record of all Periodic Inspections.
If any deficiency is detected during the inspection, consult Wood’s Powr-Grip or an authorized
dealer for repair recommendations (see LIMITED WARRANTY).
Infrequent Use
If a table is used less than 1 day in a 4-week period, perform the Periodic Inspection
each time
before using the table.
T
ESTING
S
CHEDULE
Perform these tests when placing the table in service
initially and each time following a repair or
modification. Correct any deficiency and retest before using the table.
• Test all features and functions of the table (see USAGE FEATURES and USAGE).
M
AINTENANCE
S
CHEDULE
Maintenance must be performed whenever a deficiency is indicated by routine inspections or
tests. Any maintenance warranted must be performed before resuming normal use of the table.
Summary of Contents for STT1
Page 2: ......
Page 18: ...Rev 9 0 1 18 16 STT1 35151...
