Rev 9.0/1-18
8
STT1: #35151
FIGURE 6: FINAL ASSEMBLY
7) Assembly the final assembly as shown in Figure 6:
8) Securely attach the table top surface to the top frame assembly, using the hardware supplied.
Note: When the base kit (STT) is purchased separately, install an appropriate table top
surface. This typically consists of plywood sheets cut to fit the frame dimensions, and it may
include a felt covering, to help prevent scratching of the load material. A top surface of this
type (STTTF) or a felt kit to construct such a surface using customer-supplied wood (STTTFK)
may be purchased from Wood's Powr-Grip or a distributor (see REPLACEMENT PARTS LIST).
9) Test the table as directed in MAINTENANCE: T
ESTING
S
CHEDULE
.
1) 5/8-11 NYLON LOCK HEX NUT − GRADE 8
5) TOP ASSEMBLY
2) 5/8" SAE FLAT WASHERS
6) BASE FRAME ASSEMBLY
3) NYLON SPACER
7) ROLLER ASSEMBLY
4) 5/8-11 X 4" HEX HEAD BOLT − GRADE 5
Summary of Contents for STT1
Page 2: ......
Page 18: ...Rev 9 0 1 18 16 STT1 35151...
