WPG MRPTHD1211LAC, Operating Instructions Manual

Page: 14 / 42

MRPTHD-AC: #35066 Rev 1.0/2-21 12
Extending/Retracting Telescoping Pad Arms
1)
1B 2B
Remove the
cotterless hitch
pin and slide a
telescoping pad
arm into or out of
the pad frame
until the hitch pin
holes align at the
desired position
(fig. 1B).
1
2) Reinsert the pin to secure the telescoping pad arm (fig. 2B).
3) Repeat steps 1-2 to reposition other telescoping pad arms, as needed.
Repositioning (or Removing) Movable Pad Mounts
1)
1A 2A 3A
Remove the
cotterless
hitch pin
from a
movable pad
mount (fig.
1A).
2) Move the pad mount to the desired position on the pad frame and align the pin holes (fig.
2A).
3) Reinsert the pin to secure the pad mount (fig. 3A).
4) Repeat steps 1-3 to position other pad mounts, as needed.
Removing or disconnecting
any vacuum pad reduces
lifting capacity.
To remove a vacuum pad altogether, disconnect the
corresponding vacuum hose (see next section) and
remove the pad mount as previously directed. Store
removed components in a clean, dry location.
1..... Pad arms should not be removed during normal operation of the lifter.
ASSEMBLY