Rev 1.0/2-21
MRPTHD-AC: #35066
9
4) Suspend the lifter from appropriate hoisting equipment:
4.1)
Select a crane and/or hoist rated for the Maximum Load Capacity plus the
Lifter Weight.
Note: Any lifter use must comply with all statutory or regulatory standards for
hoisting equipment in your region.
4.2)
4D
4E
4F
Attach the hoisting hook to
the lift point (fig. 4D).
Make sure hook
has restraining
latch (circled in fig. 4E).
Only use rigging rated for Maximum
Load Capacity plus Lifter Weight.
Note: Use rigging (fig. 4F) as
needed to make sure the hook does
not interfere with the load.
4.3) Use the hoisting equipment to remove the lifter from the shipping container. Avoid
damaging the vacuum pads.
Note: The hoist control pendant can be attached to the lifter by placing it in the hoist
pendant holder provided.
5)
5A
Remove the pad covers (fig. 5A) and save them for future use.
6) If the lifter has an adjustable pad frame, configure the frame for optimal load support
7) Perform tests as required under
on page 26.
ASSEMBLY
Summary of Contents for MRPTHD1211LAC
